Specification

Temperature Range:Operating 0° C ~ 50° C; storage & shipping -20° C ~ 80° C

Temperature Coefficient:0.01% / ° C

Transient Response:Output voltage returns in less than 1 ms max. at a 25% load change

Hold-up Time:16ms minimum at full load & nominal input voltage

Dielectric Withstand:Input to frame ground 1800 VAC for 1 second

Humidity:95% RH

Efficiency:63% at minimum measured at nominal AC main voltage and frequency with maximum load on all output

Power Good Signal:Power on delay time 100 ms to 500 ms, off delay 1 ms minimum

Overload Protection:150% Max.

Maximum power:460W  ( +5V and +3.3V total output not exceed 200W, 3.3V &+5V &+12V total output not exceed 440W )

Dimensions (WxHxL):106x40x300(mm)/4.17”x1.57”x11.8”

Features

• High efficiency

• Active PFC circuit

• Power factor correction (PFC)>0.95@100VAC

• Internal 12 VDC fan included

• Low noise and ripple

• Complies with FCC part 15 subpart J class B 115VAC operation and CISPR 22 class B 230 VAC operation

• Output over voltage protection

• Short circuit protection on all outputs

• MTBF above 100,000 hrs. at 25° C

• 100% Hi-pot & ATE tested

• Short circuit protection on all outputs

• Resettable power shut down

• 100% burn-in under high ambient temp. (50° C)

• Approved by UL 1950, CSA C22.2 Level 3, IEC 950, VDE 60950, TUV EN60950, CE